Mega Tree Base Tutorial - Page 1
This tutorial is meant to assist you in building your own mega tree base. I have done the best I can to make sure that it is as detailed as possible. If you find any errors or see anything that can be helpful to others, just email me and let me know.
PARTS LIST
Don't Forget, you can also order all the snap tees or entire kits at www.christmaslightshow.com
| 1 |
7 Pieces of 10' Long - 3/4" Schedule 40 PVC white pipe {Lowes/Home Depot} |
| 2 | 8 Pieces of 10' Long - 3/4" Schedule 40 PVC Gray Electrical Conduit {Lowes/Home Depot} |
| 3 | 16 Each of 45 degree Schedule 40 PVC Elbows (white) {Lowes/Home Depot} |
| 4 | 2 Each of 7.1' Long 3/4" Poly Cold Water Pipe (black) {Lowes/Home Depot} |
| 5 | 2 Each 3/4" Poly Cold Water Pipe "Barb Splices" {Lowes/Home Depot} |
| 6 | 12 Each "Dura" 3/4" Snap on Tees (Slip fit NOT threaded) {Plumbing Supply Store} |
| 7 | 54 Each "Spears" 3/4" Snap on Tees (Slip fit NOT threaded) {Plumbing Supply Store} |
| 8 | Flag Pole or Center Post of your choice |
| 9 | Spray Paint (For Plastic or PVC) 3-4 Cans {Lowes/Home Depot} |
| 10 | PVC/Conduit Cement - 1 medium can {Lowes/Home Depot} |
IMPORTANT NOTE:
The following pictures show enough parts for TWO (2) bases. I built both of mine at the same time. The parts list above and the following cut sheet are only for 1 base.